NEED:1 GB PEN DRIVE...... BY SABBIR NATORE
The first is that you take this action to a minimum of one GB Capacity USB drive. Although no longer a problem. However, it must be a FAT file system can not support. This is usually done with eight or more capacity pen drives Sixteen only FAT32 file system supported by most of the GB. And so this is the first to be sure. That's a Windows XP CD. Using the CD was found, but a backup hard drive to facilitate the work of the day. The problem is that using the Windows XP CD setapera, if you scratch the disc if you have a fear to be misinyera file. I do not agree that the pen drive.However, how do I come in that context. First, download the tools needed to create a Bootable pen drive. Now follow the following steps gradually.
And the tools to extract the two folders inside it will bootsect and usb_prep8.
Make your pen drive, USB port connect.
Open the folder inside the file usb_prep8 usb_prep8.cmd. A command prompt will open.
A window will open PeToUSB hitting any key. See the following screenshot.
PeToUSB any changes to the Start button on the window pane to format the drive.
When the formatting window, two (usb_prep.cmd and PeToUSB) Do not stop. The Start> Run, enter cmd, go to open a command prompt. Path to the folder that contains the file bootsect.exe.
Remember, your folder to the hard disk drive is F. The first F:, then press Enter. Then cd usbxp \ bootsect days and then Enter. Enter your bootsect.exe/nt52 J: (J Drive Letter of the land to the pen drive). Keep out of the pen drive while bootsect.exe a window
Open is not.
After all, if OK Enter Press "Bootcode was successfully updated on all targeted volumes", you will see message. Close the command prompt and then enter. Close the command prompt, but do not usb_prep8.
Close the window now PeToUSB. I like the image below usb_prep8 command prompt will appear.
Note that the accuracy of information provided here will be numbers 1-3. So follow the steps correctly.
Press 1 and then Enter. A Folder Browse Window will open. Show the location of the backup hard drive from Windows XP to keep the show.
Press 2 and then Enter. To create a virtual drive and press Enter to T as a Drive Letter.
Press 3 and then Enter. Drive Letter to the pen drive.
Press 4 and start the process.
I created a virtual drive, format it, do not know what will. Enter Y and press Enter.
Once formatted, press Enter. Now you can see the virtual drive from a backup copy of XP that is. It will take about 3-5 minutes of time. When finished, press Enter again.
The virtual drive will be copied to the USB drive, you will not be asked. You must click Yes. The process can take about 15 minutes. However, it depends on the speed of the pen drive.
A popup window will appear when completed. Click Yes.
The entire process is finished, click the Yes button on the virtual drive, select Unmount.Is the diameter of your Bootable Pen Drive. The BIOS on USB was selected as the First Boot Device Boot themselves can be done. The BIOS Boot Priority in the selection. Restart the computer to wait for a menu will appear. Option two would be the name of the GUI Mode and Text Mode. Now select the Text Mode from the Windows XP Setup, you can speak to the pen drive. I can easily.
And the tools to extract the two folders inside it will bootsect and usb_prep8.
Make your pen drive, USB port connect.
Open the folder inside the file usb_prep8 usb_prep8.cmd. A command prompt will open.
A window will open PeToUSB hitting any key. See the following screenshot.
PeToUSB any changes to the Start button on the window pane to format the drive.
When the formatting window, two (usb_prep.cmd and PeToUSB) Do not stop. The Start> Run, enter cmd, go to open a command prompt. Path to the folder that contains the file bootsect.exe.
Remember, your folder to the hard disk drive is F. The first F:, then press Enter. Then cd usbxp \ bootsect days and then Enter. Enter your bootsect.exe/nt52 J: (J Drive Letter of the land to the pen drive). Keep out of the pen drive while bootsect.exe a window
Open is not.
After all, if OK Enter Press "Bootcode was successfully updated on all targeted volumes", you will see message. Close the command prompt and then enter. Close the command prompt, but do not usb_prep8.
Close the window now PeToUSB. I like the image below usb_prep8 command prompt will appear.
Note that the accuracy of information provided here will be numbers 1-3. So follow the steps correctly.
Press 1 and then Enter. A Folder Browse Window will open. Show the location of the backup hard drive from Windows XP to keep the show.
Press 2 and then Enter. To create a virtual drive and press Enter to T as a Drive Letter.
Press 3 and then Enter. Drive Letter to the pen drive.
Press 4 and start the process.
I created a virtual drive, format it, do not know what will. Enter Y and press Enter.
Once formatted, press Enter. Now you can see the virtual drive from a backup copy of XP that is. It will take about 3-5 minutes of time. When finished, press Enter again.
The virtual drive will be copied to the USB drive, you will not be asked. You must click Yes. The process can take about 15 minutes. However, it depends on the speed of the pen drive.
A popup window will appear when completed. Click Yes.
The entire process is finished, click the Yes button on the virtual drive, select Unmount.Is the diameter of your Bootable Pen Drive. The BIOS on USB was selected as the First Boot Device Boot themselves can be done. The BIOS Boot Priority in the selection. Restart the computer to wait for a menu will appear. Option two would be the name of the GUI Mode and Text Mode. Now select the Text Mode from the Windows XP Setup, you can speak to the pen drive. I can easily.
No comments:
Post a Comment